Timco Lithium EP2 Grease - 400g 
ALM Code 7 Milled Lead - 300mm x 3m 
Timco 8 Spanner Set 
Thompson's One Coat Damp Seal - White 2.5L 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
OX Pro Magnetic Level 600mm 
Siroflex Trade Hand Held PU Expanding Foam 
ALM Code 3 Milled Lead - 300mm x 6m 
FloPlast Square External Stopend - White 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Code 7 Cast Lead - 390mm x 6m 
ALM Code 6 Milled Lead Flashing - 150mm x 3m 
Code 6 Cast Lead - 450mm x 3m 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Stanley Hi-Viz Tylon 5m/Ex19mm Tape 
Code 4 Cast Lead - 850mm x 3m 
Pinkgrip Dryfix Applicator Gun 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Klober Double Roman Roof Tile Vent - Antique Red KG9857-3-0116 (Box of 10) 
The 125 One Hour Chaulk by Everbuild has excellent properties allowing it to seal and fill cracks and gaps before decorating. It can seal the perimeter with ease, offering a robust sealant that will maintain strength. Other areas this is great for application include skirting boards, ceiling cornices, windows and door frames.
Preparation
You must prepare the surfaces before starting the application, this is because if you do not, certain impurities present may hinder the adhesion of this product.
Ensure you remove all old sealants, remove any flaking on the surface and ensure the surface is free from dust, oil, and grease and is clean and dry.
Application
- Cut the tip of the cartridge, and make sure you do not damage the threaded screw.
- Screw the nozzle onto the top of the cartridge, cut it at a 45° angle with an opening slightly larger than the gap to be filled
- Use a standard sealant gun, apply directly to the surface, and maintain even pressure to guarantee an even bead.
- Smooth down within 20 minutes of application, and you can do this with an applicator tool, wetted spatula or wooden spoon that is gently soaked with a soapy solution.
- You can paint over this product around 1 hour after application.
Limitations
- Do not use this product if it will get into contact with bitumen or asphalt.
- Do not attempt to abrade when cured.
- Please wait until it's fully cured before painting.
- For internal use only.
- Certain paints may not work and damage the sealant, certain vinyl matts won't work.
