Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Cromar Cold Gritting Solution - Black 25 Litres 
Timco Round Wire Nails, Pack of 40 
Easy Prime Porcelain Prime Slurry - 15kg 
Everbuild 502 Wood Adhesive – 1 Litre 
Code 5 Cast Lead - 850mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Code 7 Cast Lead - 1600mm x 3m 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Everbuild Black Jack 901 Black Bitumen Paint – 2.5 Litre 
Sika Dustproofer – Clear 5 Litre 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
OX Pro Rodless Sealant Gun - Up to 400ml 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Code 6 Cast Lead - 800mm x 3m 
Timco Aluminium Hawk 
Soudal Grip All Solvent-Based - 290ml 
Everbuild Stainblock - White 400ml 
Spax Magnetic Bit Holder - 1 Piece 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Cromar Roof Felt Adhesive - Black 1 Litre 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
