Cromar Roofing Felt Adhesive - Black 5 Litre 
Everbuild Febond PVA - 5L 
FloPlast Half Round Line Pipe Socket, White 
Code 8 Cast Lead - 1600mm x 3m 
Timloc Standard Roof Tile Vent Adaptor 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Timco Impact Driver Bit Set 
Code 6 Cast Lead - 450mm x 6m 
ALM Code 5 Milled Lead - 210mm x 3m 
ALM Code 4 Milled Lead - 510mm x 3m 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
This GRP Fibreglass Premium Resin is a key component in a fibreglass installation. Made by the fibreglass-specialists at Stronghold, it forms the crucial initial layer of a fibreglass roof.
Before GRP matting can be laid on a flat roof, an initial layer of Fibreglass Resin must be used to prepare the roof and produce a smooth surface for the matting to be laid on. Afterwards, a fibreglass topcoat is used to seal everything off and protect it.
Please note that GRP Fibreglass Premium Resin will need to be mixed with a methylethyl ketone peroxide catalyzing agent before it can properly cure. Instructions on how specifically to do this and what ratios are needed are found in the installation guide. Fibreglass is a complex and hazardous material to work with. If you are a DIYer roofer, it may be best to consult a professional for fibreglass work rather than tackle it yourself.
