10 x Permavent Black Breather Membrane – 1m x 50m 
Code 6 Cast Lead - 150mm x 6m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
ALM Code 8 Milled Lead - 240mm x 3m 
Klober Universal Tile Vent Grey KG9854 (Box of 10) 
Code 8 Cast Lead - 760mm x 6m 
Timco 30mm Cladding Pin - 250 Pieces 
Right Hand Klober Uni-Click Dry Verge Units Terracotta 
OX Pro Aluminium Metric Rafters Square - 300mm 
Soudal Gun & Foam Cleaner Gun Grade - 500ml (Box of 12) 
Everbuild Mammoth Clear Weatherproof Tape 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Isoflex Clean Up Fluid - 500ml 
Bond It All Weather Roofing Compound - Black 25L 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Hambleside Danelaw Double Pantile Vent TV15/2 - Terracotta (Box of 5) 
The Double Pantile Tile Vent by Klober is perfect for providing exceptional ventilation into your roof space or a room in your home. This product is forged to deliver up to 10,000mm² ventilation, which can go into the roof or be used in mechanical extraction. It's a sleek design that visually hides once installed; alongside being naturally lightweight and durable, it's perfect for existing or new roofs. Each Tile Vent weighs less than a Kilo and is suitable for pitches from 17.5° upwards.
Installing Klober Double Pantile Tile Vent
To install the Klober Double Pantile Tile Vent, identify the tile you want to replace on the roof. Place the Tile Vent over the tile and mark a 120 x 180mm wide rectangle. Afterwards, create a star cut from opposing corners and fold the four tabs back and upwards, ensuring the top tab is secured to the batten above. Lastly, fix the tile vent into position, securing it in place using the fixing clips located under the left-hand interlock of the roof tile.
