D4 Wood Adhesive – 1 Litre 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
BORA - PM-4550 Adjustable Speedhorse XT (Set of 2) 
Code 5 Cast Lead - 1000mm x 6m 
Code 4 Cast Lead - 150mm x 3m 
OX Tools Pro Self Levelling Laser Level - 60m 
Everbuild Industrial Superglue HV - Clear 50g 
ALM Code 4 Milled Lead - 800mm x 3m 
Timco 4" Press Lock, Black 
Code 6 Cast Lead - 914mm x 6m 
ALM Code 3 Milled Lead - 240mm x 3m 
Timco Blue Polypropylene Rope 8mm x 15m 
ALM Code 8 Milled Lead - 390mm x 3m 
Standard Brush 4-Inch 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Thompson's One Coat Damp Seal - White 250ml 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Code 8 Cast Lead - 1000mm x 6m 
Bond It The Beast PU Adhesive - Brown 500ml 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
The Double Pantile Tile Vent by Klober is perfect for providing exceptional ventilation into your roof space or a room in your home. This product is forged to deliver up to 10,000mm² ventilation, which can go into the roof or be used in mechanical extraction. It's a sleek design that visually hides once installed; alongside being naturally lightweight and durable, it's perfect for existing or new roofs. Each Tile Vent weighs less than a Kilo and is suitable for pitches from 17.5° upwards.
Installing Klober Double Pantile Tile Vent
To install the Klober Double Pantile Tile Vent, identify the tile you want to replace on the roof. Place the Tile Vent over the tile and mark a 120 x 180mm wide rectangle. Afterwards, create a star cut from opposing corners and fold the four tabs back and upwards, ensuring the top tab is secured to the batten above. Lastly, fix the tile vent into position, securing it in place using the fixing clips located under the left-hand interlock of the roof tile.
This listing comes as a box of 10 vents only.
