Bond It Mould Stop - Clear 1L 
Code 8 Cast Lead - 1000mm x 3m 
Siroflex Trade Strength Medium Viscosity Superglue - 20g 
Code 7 Cast Lead - 390mm x 3m 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Ronseal Diamond Hard Floor Varnish - Clear Matt 5L 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
ALM Code 3 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
ALM Code 7 Milled Lead - 600mm x 3m 
Code 6 Cast Lead - 510mm x 6m 
Code 4 Cast Lead - 600mm x 6m 
FloPlast Universal Hopper, Black – 65-68mm 
Everbuild 404 Fungicidal Wash – 5 Litre 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Everbuild 502 Wood Adhesive – 1 Litre 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 5 Milled Lead - 210mm x 6m 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
Everbuild Bath & Kitchen Sealant - 200ml 
Ox Tools Waterproof Latex Gloves Size 9 Large 
Sika 1 Waterproofer – 5 Litre 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
The Klober Single Pantile Vent - Slate Grey KG9860-0429 is forged with durability and efficiency in mind. Utilising a polypropylene composite alongside an innovative design, achieving up to 10,000mm² ventilation. It can withstand knocks and bumps and is naturally lightweight, making transporting to a roof effortless.
The polypropylene composite is an excellent choice for tile vents because of its naturally lightweight and durable properties. Not only is it virtually corrosion-free, but it also provides outstanding resistance to weathering, ensuring long-term performance.
Furthermore, this product is incredibly easy for roofers to install, making the job more efficient. In addition, Klober remains one of the most trusted manufacturers in the roofing industry, further reinforcing the product’s reliability and quality.
Installing Klober Thin Line Tile Vent
To install the Klober Single Pantile Tile Vent correctly, start by identifying the tile you want to replace, holding the Tile Vent over, and marking a 120 x 180mm rectangle below.
Slice into the underlay from opposing corners, fold the four tabs back and upwards and fix the top tab to the batten above. Fix the vent into position, ensuring the fixing clip is located under the left-hand interlock of the tile.
This comes as a pack of 10 Vents only
