Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Everbuild Stainblock - White 400ml 
Code 6 Cast Lead - 300mm x 3m 
ALM Code 3 Milled Lead - 450mm x 6m 
Code 5 Cast Lead - 510mm x 6m 
Roughneck® V-Series Axe - 20oz/0.6kg 
FloPlast Half Round Gutter Union, White 
Klober Double Pantile Vent - Brown KG9858-3-0247 (Box of 10) 
Armatool Flooring Kneepads 
FloPlast Round Line Downpipe Clip, Brown 
ALM Code 8 Milled Lead - 450mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Everbuild Patio Wizard – 1 Litre 
Timloc Telescopic Underfloor Vent 5-7 Courses 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
OX Tools Pro Torpedo Level, 9" / 230mm 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Easy-Trim Universal Dry Verge Unit - Black 
Cromar Bitumen Trowel Mastic - Black 1L 
Code 7 Cast Lead - 390mm x 6m 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
The Thin Line Tile Vent is perfect for installation into interlocking roof tile profiles, with exceptional airflow properties offering up to 10,000mm². It's ideal for combating moisture and condensation building up, alongside attaching to mechanical or soil extraction systems. It's vital to ensure that your attic is ventilated; otherwise, it'll suffer from dampness and, inevitably, further issues.
The installation of this product is effortless for experienced roofers, with it sliding in seamlessly and clipping it. Once installed, it's virtually impossible to see highlighting the sleek design that Klober achieved. Forged from PVCu, it's a naturally lightweight material ideal for transporting alongside coated with Acrylonitrile styrene acrylate (ASA). This excellent UV-resisting coating retains the colour of the tile vent.
Installing Klober Thin Line Tile Vent
To install the tile vent correctly, place the thin line tile vent over the existing tile you want to replace and mark a rectangle of 120 x 180mm wide. Cut into the underlay from opposing corners and fold back the four tabs upwards, ensuring the top tab is secured to the batten above. Place the Thin Line tile vent into position and securely clip it using the fixing clips underneath the left side.
