ALM Code 3 Milled Lead - 1600mm x 3m 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Bond It Extruder for Foil Sausages - Silver 600ml 
Code 5 Cast Lead - 150mm x 3m 
Code 7 Cast Lead - 850mm x 3m 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Code 6 Cast Lead - 850mm x 3m 
ALM Code 4 Milled Lead - 360mm x 6m 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
OB41 White Grease Spray - 400ml 
ALM Code 7 Milled Lead - 800mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
