Code 5 Cast Lead - 240mm x 6m 
Code 8 Cast Lead - 360mm x 3m 
Code 4 Cast Lead - 850mm x 6m 
Code 3 Cast Lead - 360mm x 3m 
ALM Code 7 Milled Lead - 1200mm x 6m 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Bond It Decking Oil - Natural 5L 
Soudal Mitre Kit 50g + 200ml - Clear 
Cromar Bitumen Primer – Black 1 Litre 
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
ALM Code 3 Milled Lead - 210mm x 3m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
