Everbuild Gun A Nail Standard – White 310ml 
ALM Code 8 Milled Lead - 360mm x 6m 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Code 6 Cast Lead - 240mm x 3m 
Everbuild Stainblock - White 400ml 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Bond It Contractors PVA - 25L White 
Bond It Decking Oil - Natural 5L 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Sika Damp-Proof Slurry Grey - 25kg 
Bostik Express Cement Pointing Mortar Buff – 310ml 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Everbuild Mammoth Clear Weatherproof Tape 
Code 8 Cast Lead - 180mm x 3m 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
ALM Code 3 Milled Lead - 850mm x 3m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
