Ronseal 3 in 1 Basecoat - White 2.5L 
Code 5 Cast Lead - 600mm x 3m 
Soudal Trade Sanitary Silicone - White 290ml 
Cromar Bitumen Primer – Black 1 Litre 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
ALM Code 4 Milled Lead - 360mm x 6m 
ALM Code 5 Milled Lead - 914mm x 6m 
Armatool Slate Rip - Stainless Steel 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Black (Box of 5) 
Permavent Easy Slate 500 - Box of 100 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Code 4 Cast Lead - 850mm x 6m 
Soudal Soudatherm Roof 250 - 800ml 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Klober 15x9 Tile Vent - Brown KG9690-0247 (Box of 10) 
Code 8 Cast Lead - 510mm x 3m 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
Code 3 Cast Lead - 360mm x 6m 
Soudal Sealant Remover – 400ml 
ALM Code 3 Milled Lead - 914mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
