Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
FloPlast Square Line Pipe Connector White 
Samac Snowguard - 225mm x 2m 
Code 7 Cast Lead - 390mm x 3m 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
FloPlast Round 92½° Bend - White 
Timco Hazard Tape 
Code 3 Cast Lead - 600mm x 6m 
Code 5 Cast Lead - 240mm x 6m 
ALM Code 3 Milled Lead - 360mm x 6m 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
ALM Code 8 Milled Lead - 1200mm x 3m 
Code 6 Cast Lead - 180mm x 3m 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Lead Hall Fixing Clips - Pack of 50 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Armatool Mop Heads Size 12 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Everbuild Wood Filler Hardener / Catalyst - 40g 
FloPlast Half Round Union Unit - White 
Ronseal Precision Finish Brush - 2 Inch 
Code 8 Cast Lead - 240mm x 6m 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
ALM Code 4 Milled Lead - 180mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
Uses
The OX Tools OXIT Sealant & Adhesive is a new, innovative range offering the ultimate versatility. With excellent adhesive strength accompanied by outstanding joint sealant finishing. It is crafted for heavy-duty automotive and transportation industries. It is also excellent for domestic use. Ideal for use in and around a property, this product is heavily resistant to chemicals, UV light and water.
Preparation
Before starting the application, clean the surface thoroughly to eliminate all contaminants that could hinder adhesion. Common impurities that affect performance include dirt, dust, grease, oil, flaking material, and loose debris.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening to your desired amount and screw it onto the cartridge.
- Place the cartridge into a suitable applicator tool.
- For sealant jointing, point the tip of the nozzle to the gap and apply a singular bead along the gap, smoothing it down afterwards using a sealant applicator tool.
