Soudal Brake Cleaner - 400ml 
Freeflow 65mm Square Down Pipe Clip Standard - White 
Double Nylon Tool Pouch with Belt 
Klober Regent Tile Vent KG6084, Grey 
Ronseal Exterior Yacht Varnish - Satin 500ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Ronseal One Coat Stain Block - White 2.5L 
Soudal Construction Silicone, Grey - 290ml 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
ALM Code 5 Milled Lead - 300mm x 3m 
OX Pro Magnetic Level 600mm 
EVO-STIK Stick Like Sh*t - White 290ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Soudal Superglue Activator - 200ml 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Gorilla Tape - Black (48mm x 32m) 
Timco 25 Spanner Set 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
OX Pro Dry Wall Hammer - 14 oz 
Hambleside Danelaw Felt Lap Vent 
Everbuild Flue Jointing Compound - 1kg 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
