OX Pro Harling Trowel - 165mm X 165mm 
Soudal Bathroom & Kitchen Silicone - White 290ml (Box of 12) 
Everbuild Febond PVA - 1L 
Thompsons One Coat Roof Seal - Black 5L 
Klober Regent Tile Vent KG6084, Grey 
ALM Code 8 Milled Lead - 450mm x 3m 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 2.5L 
Soudal Cleaner & Degreaser - 400ml 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Cromar Vent 3 Light Breathable Membrane – 1.5m x 50m 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Code 6 Cast Lead - 600mm x 3m 
Everbuild Instant Nails – White 290ml 
ALM Code 7 Milled Lead - 240mm x 6m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Ronseal One Coat Stain Block - White 750ml 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
