Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Bond It Gripbond Pro Max Adhesive - White EU3 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Code 3 Cast Lead - 180mm x 3m 
Soudal Grip All Solvent-Based - 290ml 
Timco 8 Spanner Set 
Sika Dustproofer – Clear 5 Litre 
Everbuild Lead Mate Patination Oil – 500ml 
ALM Code 4 Milled Lead - 914mm x 6m 
Bond It Heavy Duty Gun Foam Applicator 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Code 4 Cast Lead - 510mm x 3m 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Right Hand Klober Uni-Click Dry Verge Units Terracotta 
Klober Permo Ecovent - 1.1m x 50m 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Bond It Professional Foam Gun Applicator 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
FloPlast Half Round External Stop End, Black – 112mm 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml 
The Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate using warm, soapy water to wash the surface.
If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
