OX Trade Medium Red Carpenters Pencils - Pack of 10 
Soudal PTFE Spray - 400ml 
Timco Nut Mix Grab Pack - 980 Pieces 
Code 8 Cast Lead - 450mm x 3m 
Bond It Decking Oil - Natural 5L 
FloPlast Half Round Gutter 135° - White 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
FloPlast Half Round Union Unit - Black 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
ALM Code 4 Milled Lead - 210mm x 6m 
Everbuild 503 SBR Bond – 5 Litre 
Timco FirmaHold Collated ST Brad Nails A2 SS - 18g x 5000 PCS 
Code 3 Cast Lead - 800mm x 3m 
Everbuild PVCu Cream Cleaner - 1 Litre 
Soudal Repair Express Plaster - White 250ml 
Soudal Repair Express Plaster - White 900ml 
Easy-Trim Universal Dry Verge System - Grey 
Samac Snowguard - 225mm x 2m 
ALM Code 8 Milled Lead - 800mm x 6m 
Everbuild Stick2 All Purpose Clear Adhesive - 30ml 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Code 4 Cast Lead - 1000mm x 6m 
Bond It Rubber Bitumen Emulsion - Black 5L 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Everbuild Black Jack 901 Black Bitumen Paint – 2.5 Litre 
Ronseal Anti-Bacterial Worktop Oil - Clear 500ml 
Uses
The Knot Block Wood Primer and Undercoat by Ronseal offers the perfect product to seal knots from showing. This paint has a thick, white pigment that transforms the knot into a clear white coat, and this coat is perfect for further application due to its natural primer qualities. To achieve full results, you should apply two separate coats onto the knot, giving enough time to dry in between to hide the knot securely.
Preparation
Place dust sheets down over surfaces and objects you don't want the paint to spill onto accidentally. Using 120 grit sandpaper, lightly sand the wood down to an even finish; this aids the paint to adhere to the surface. If there are any loose, peeling or flaking bits on the wood, sand it all down to the bare wood. Let the dust settle and wipe it down using white spirit and a cloth. Any cracks or holes present should be filled with the appropriate filler.
Application
- Stir the tin thoroughly, ensuring you mix the pigments
- Dip your brush into the paint and apply it to the wood, brushing it with the grains of the wood
- Wait 4 hours for the coat to dry
- Apply the second coat, using the same method as the prior, brushing with the wood grains.
- Wait another 4 hours for the paint to dry.
Aftercare
Any excess paint can be cleaned using warm, soapy water. Any damages that may occur over time can be easily repaired by sanding down the area and then applying another two coats to the affected area as you had done prior.
