Soudal Brake Cleaner - 400ml 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Code 8 Cast Lead - 850mm x 6m 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Everbuild Smart Tack Handy – 500ml (Box of 12) 
Everbuild Multi-Stick Adhesive - White 350ml 
ALM Code 8 Milled Lead - 300mm x 3m 
ALM Code 5 Milled Lead - 914mm x 3m 
Soudal Orange Skeleton Gun - Up to 310ml 
Everbuild Wood Adhesive 502 – 500ml 
Permavent Easy Slate 600 - Pack of 20 
Easy-Trim Ridge F Universal Dry Ridge System - 10m Kit 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Bond It Rubber Bitumen Emulsion - Black 5L 
Timco Screwdriver 6-Tool Set 
ALM Code 7 Milled Lead - 150mm x 3m 
Code 6 Cast Lead - 850mm x 3m 
Cromar ProRidge Universal Ridge System 3m Kit 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
