Soudal Soudafoam Hand Held One Shot - 150ml 
Code 4 Cast Lead - 180mm x 3m 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Soudal Trade PU Construction Adhesive - Beige 290ml 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
ALM Code 4 Milled Lead - 210mm x 6m 
Code 7 Cast Lead - 1600mm x 3m 
Code 8 Cast Lead - 600mm x 3m 
Siroflex Trade Strength Glass Cleaner - 1L 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Soudal Glass and Mirror Cleaner - 1 Litre 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Gorilla Heavy Duty Mounting Tape - Crystal Clear (25mm x 1.5m) 
Code 6 Cast Lead - 1600mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
