Bond It SBR Admixture - White 5L 
ALM Code 3 Milled Lead - 914mm x 6m 
Code 5 Cast Lead - 180mm x 6m 
Everbuild Stick2 Superglue De-Bonder - 20ml 
Thompson's Water Seal - 5L 
Code 3 Cast Lead - 450mm x 3m 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
ALM Code 7 Milled Lead - 914mm x 6m 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Soudal Construction Silicone, Clear - 290ml 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Everbuild Triple Action Wood Treatment – 5 Litre 
ALM Code 8 Milled Lead - 1600mm x 6m 
Ulti-Mate Interlocking Roof Vent Tile - Charcoal 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Bond It Silicone Release Spray - 500ml Clear (Mould Releasing Lubricant) 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
Code 4 Cast Lead - 210mm x 3m 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
