Everbuild Coving Adhesive & Joint Filler - 290ml 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Code 3 Cast Lead - 390mm x 6m 
Everbuild 502 Wood Adhesive – 1 Litre 
OX Pro Dry Wall Hammer - 14 oz 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
Code 4 Cast Lead - 800mm x 3m 
ALM Code 7 Milled Lead - 300mm x 3m 
Ronseal One Coat Blackboard Paint - Black 250ml 
ALM Code 8 Milled Lead - 1200mm x 6m 
OX Pro Rodless Sealant Gun - Up to 400ml 
Ronseal Diamond Hard Floor Varnish - Clear Satin 5L 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Code 6 Cast Lead - 150mm x 6m 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
ALM Code 4 Milled Lead - 510mm x 6m 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
