Code 7 Cast Lead - 600mm x 6m 
Circular Soffit Vent, White 
ALM Code 8 Milled Lead - 1600mm x 3m 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Bond It Monster Wipes - White 75 Wipes 
Everbuild Quick Drying Clear Varnish - Gloss 2.5L 
Code 3 Cast Lead - 390mm x 6m 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Isoflex Clean Up Fluid - 500ml 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Bond It Decking Oil - Natural 2.5L 
Code 8 Cast Lead - 300mm x 6m 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
ALM Code 3 Milled Lead - 800mm x 6m 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Restec GRPROOF 1010 Base Coat Resin - 10kg 
Code 5 Cast Lead - 450mm x 6m 
Armatool Slate Guillotone 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Timloc Thin Leading Edge Tile Vent Black 
Bostik Cementone PVA - 5 Litre 
Bond It Mould Stop - Clear 2.5L 
Uses
The Stain Block Aerosol by Ronseal's is a convenient, simple-to-use stain blocker that prevents stains from seeping through, causing unsightly walls and ceilings. In just one coat, this product can achieve its ability to prevent stains, but with 2 to 3 coats, you can securely hide the stain. Some of the types of household stains that this product can contain include;
- Crayons
- Wine
- Grease
- Nicotine
Preparation
You should prepare the application by ensuring the room is well-ventilated and place a dust sheet over any furniture to keep it safe from the paint. As you spray this aerosol, paint can fly around if not done safely.
Application
- Shake the can, paying close attention to the ball's rattle. To mix the aerosol properly, you should ensure the balls rattle for about a minute.
- Apply to the application area, holding the can about 25-30cm, spraying side to side.
- Wait for around 10 minutes for the first coat to dry.
- Apply the second coat in the same fashion as before, giving 10 minutes for this coat to settle as well.
- Apply a third and final coat if you can still see a stain seeping through.
- You can decorate over the stain but must wait at least 24 hours to let it fully settle.
Aftercare
This product isn't intended to be a top coat, so decorating over it is expected. You can clean the aerosol by holding it upside down and spraying the can.
