Freeflow Square Gutter System Gutter 135° Angle - White 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Easy-Trim End Cap Angled - Black (Box of 10) 
ALM Code 7 Milled Lead - 1200mm x 6m 
Timco Copper Disc Rivets 
Cromar Bitumen Primer – Black 5 Litre 
Ronseal Stays White 2in1 Paint & Primer - Matt 2.5L 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Restec GRPROOF 1010 Base Coat Resin - 10kg 
FloPlast Half Round External Stop End, Black – 112mm 
Ronseal Exterior Yacht Varnish - Satin 500ml 
ALM Code 8 Milled Lead - 390mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Armatool Stripping Spade 
Bora Workhorse Single Piece Stand with Folding Legs PM-3350 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Bond It Aluminium Foil Tape - 100mm x 45M 
Timco Air Wedge 
Freeflow 112mm Round Union Gutter Bracket - White 
Code 7 Cast Lead - 360mm x 3m 
Soudal Superglue Activator - 200ml 
OX Pro Tile Nippers 200MM / 8" 
Timloc Castellated Tile Vent Red (Box of 8) 
Everbuild ASBO Graffiti Remover - 400ml 
Code 6 Cast Lead - 510mm x 6m 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Uses
The Ultimate Finish Interior Floor Pad Kit by Ronseals allows you to work efficiently on your floor. It can achieve all this effectively, whether painting, varnishing or general cleaning. This kit comes complete for you to get on your way and start working on your decking, but if you are looking for long-lasting use from this product, you can also purchase replacement pads from our ERoofing store.
Preparation
Start by assembling your kit. Clip the soft-grip handle into the padded head and set the angle using the black button slider. Each section of the 5-piece extension pole will easily slot into each other and is securely locked by twisting clockwise. Screw the pole into the soft-grip handle.
Application
Yellow Application Pad:Â This pad is designed for oils, stains and waxes. You should pour your product into a tray and dip the yellow pad into it. Don't submerge the whole pad; only to as high as the white foam on the pad reaches. Apply the pad directly to the floor, working from a corner and not finishing there; otherwise, you'll be stuck.
Aftercare
After you finish your application, you can reuse the pads by cleaning them straight after using warm, soapy water. If you have used floor oils, you may struggle to remove the oil. White spirit is sometimes used to clear it, but it'll damage the pads to the point that it might not work, so you're best to buy another pad.
