Cavity Wall Weep Extension 
Code 3 Cast Lead - 510mm x 6m 
Code 8 Cast Lead - 760mm x 3m 
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Hambleside Danelaw Double Pantile Vent TV15/2 - Antique Red (Box of 5) 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Timloc Double Roman Tile Vent Red (Box of 6) 
Bond It Multi-Purpose Powder Filler - White 450g 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 3 Milled Lead - 1600mm x 3m 
OX Pro Chalk Refill, Yellow – 226g 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
ALM Code 5 Milled Lead - 914mm x 6m 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25) 
A one part, high quality, low modulus, sealing material with an added biocide, based on advanced hybrid polymer technology.
Benefits:
- Solvent‐free & low odour.
- Mould resistant.
- Easy to tool and finish.
- Can be overpainted with water based paints.
- UV resistant.
- Quick curing.
- Contains no isocyanates, solvents, silicone and phthalates.
- Excellent adhesion to most surfaces (even moist surfaces).
- For sealing and bonding interior and exterior applications.
- Very low emissions.
Uses
Contains a powerful anti-bacterial and mould resistant formula, designed especially for applications in areas of increased humidity, such as bathrooms and kitchens. Suitable for aluminium, metal, uPVC, glass, glazed ceramics, lacquered wood, brickwork, concrete, and most plastic (except PP, PE and PTFE). Can be used both indoor and outdoor and provides long term weather resistance and UV stability. Seal Pro is also a universal adhesive which bonds to most substrates and can be used on damp surfaces.
Limitations
Can be used on damp, but not saturated surfaces. Over paintable with water-based paints only, test on a small, inconspicuous area first. Do not use on surfaces that bleed oils or plasticisers (such as bitumen) or use on natural stone without the use of a primer. Prestressed PMMA and Polycarbonate (PC) could result in stress cracking of the plastic. Conduct preliminary tests for these substrates.
Preparation
Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion. Surfaces may be moist but not overly saturated with water.
Application
Carefully cut the top of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45o . Apply, using a standard cauking gun, in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution or using a SEALANT APPLICATOR TOOL. Remove any excess material and clean tools immediately with WHITE SPIRIT. Replace plastic cap after use.
- Coverage Depending upon substrate condition and porosity the approximate coverage rates will be approximately 1m2 per cartridge.
- Colour Available in white.
- Size EU3 plastic cartridge.
