OB41 Cut Tap Drill Fluid - 400ml 
Everbuild 703 Fix & Grout Tile Adhesive - White 750g 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Klober Double Roman Roof Tile Vent - Slate Grey KG9857-3-0429 (Box of 10) 
Soudal Fix ALL Turbo - Black 290ml 
Code 5 Cast Lead - 210mm x 6m 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
FloPlast Half Round Gutter Union, Brown 
Thompson's One Coat Damp Seal - White 250ml 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Cromar Bitumen Primer – Black 2.5 Litre 
ALM Code 3 Milled Lead - 180mm x 3m 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Bond It Mould Stop - Clear 1L 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Soudal Sealant Remover – 400ml 
FloPlast Square Fascia Bracket White – 114mm 
Lead Flexi Slate Pipe Flashing - Flat 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
ALM Code 4 Milled Lead - 914mm x 3m 
Sikabond PVA - White 5 Litre 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
