Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
OX Pro Impact Bit Set - 11 Piece 
Gorilla Heavy Duty Mounting Tape - Crystal Clear (25mm x 1.5m) 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
OX Pro Mini Round Point Shovel 
Armatool Flooring Kneepads 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
Thompson's Emergency Roof Seal - Black 2.5L 
ALM Code 3 Milled Lead - 800mm x 3m 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Klober Permo Ecovent - 1.1m x 50m 
Everbuild 501 PVA – 500ml 
FloPlast Half Round Union Unit - Black 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Code 7 Cast Lead - 760mm x 6m 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Soudal Cleaner & Degreaser - 400ml 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
Stanley Dynagrip Chisel Knife - 25mm 
Timco Round Wire Nails, Pack of 40 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
OX Pro Aluminium Metric Rafters Square - 300mm 
Code 5 Cast Lead - 760mm x 6m 
Everbuild ASBO Graffiti Remover - 400ml 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Code 3 Cast Lead - 914mm x 6m 
D4 Wood Adhesive – 1 Litre 
Uses
The 112 Mortar & Brick Cleaner by Sikagard offers excellent assistance in removing and restoring mortar, bricks and similar substrates. It is formulated with water and hydrochloric acid, offering a solvent-free alternative to traditional brick-and-mortar cleaners.
Preparation
Prepare the area by pre-wetting it with clean water before application. If you want to immerse products into the solution to clean them, use an acid-proof container diluting the solution 1 part 112 Mortar & Brick cleaner to 1 part fresh water.
Application
Immersion:
As mentioned above in the preparation, properly dilute 1 part 112 Mortar & Brick cleaner to 1 part freshwater, submersing the object into a bucket of the solution until the concrete is removed, then rinse with clean water.
Brush:
Do not work on more than 1m² at a time when applying via brush. Leave the solution on the concrete until it's removed the contaminants and wash it down with fresh water to neutralise it.
Limitations
- Due to the aggressiveness of this product, it can attack the colour in paving and blocks, so ensure you carry out a preliminary test prior to completing the entire project.
- Take care in using internally with artificial stone.
- Always wash the surface down after treating it.
- Prevent contact with plants and animals when using this product.
- Surfaces that are sensitive should have a more diluted solution. Use the mixture 1:2 (cleaner to water)
