£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Soudal Fix ALL High Tack – Black 290ml (Box of 12)

Home Shop Sealants & Adhesives Glue and Adhesives Soudal Fix ALL High Tack – Black 290ml (Box of 12)
Product SKU: 101459x12
£69.60incl VAT.
£58.00excl VAT.
Out of Stock

Soudal Fix ALL High Tack Hybrid Sealant is a brilliant, high-quality, neutral elastic 1-component adhesive sealant. It is crafted with its formula based on the SMX-Polymer. Therefore, this product delivers an outstanding initial grab.

  • High initial tack, reducing the need for extra support during the curing process
  • Suitable for water-based paints to be applied onto
  • Excellent extrudability, with near-to-no odour
  • Great weather and UV resistance
  • Remains elastic even after fully cured
  • Free from Isocyanates and Silicones
  • High shear strength after curing
Frequently Bought Together:
-
+
£6.99 Incl VAT £5.83 Excl VAT
-
+
£5.99 Incl VAT £4.99 Excl VAT
Soudal Orange Skeleton Gun, Up to 310ml
-
+
£7.99 Incl VAT £6.66 Excl VAT
Total Price
£69.60 Incl VAT
£58.00 Excl VAT

Out of stock

Get notified once the product comes in stock

Uses

Fix ALL High Tack Hybrid Sealant by Soudal delivers excellent bonding properties in various applications. It has been crafted with a hybrid polymer based on the SMX-Polymer, providing an outstanding, high-strength grab with long-lasting application and resistance to weather and UV light. This product's typical areas of application include;

  • Joints in bathrooms and Kitchens.
  • Sealing and bonding in the construction industry
  • Elastic structural bonding in the motor and container industry
  • Elastic bonding of panels, profiles and other pieces on the most common substrates, typically found on a construction site or home.

Preparation

You should prepare the surface before commencing the application; otherwise, you'll not receive the optimal application this product can achieve. Remove any contaminants that can hinder this product's adhesion, including dust, dirt, grease and similar impurities.

Non-porous surfaces should be prepared with an activator or cleaner. Porous surfaces that are in water-loaded applications should be primed before application.

Application

  1. Cut the top cartridge, ensuring you do not damage the threaded screw.
  2. Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
  3. Using a standard sealant gun, apply a firm, consistent pressure to the gun handle, allowing you to extrude an even consistent bead for optimal adhesion.
  4. After applying the sealant, tool down either using an applicator tool, slightly wetted spatula or wooden spoon.

Limitations

  • Due to the wide choice of water-based paints, you should test the paint's compatibility before completing the entire project.
  • If the application area is plastic or includes plastic in contact with this product, test the compatibility before.
  • This product is not suitable to be used as a glazing sealant.
  • Do not use this product in the manufacturing of aquariums.
  • This product can be applied to stone as an adhesive but is unsuitable as a joint sealant.
  • If not kept clean, this product may stimulate organic growth.
  • Discolouration may occur if in contact with direct, long UV exposure. This will not hinder its adhesive properties.
  • Discolouration and loss of adhesion will occur if this product is used in areas where contact with bitumen, tar or plasticisers releases EPDM, neoprene, butyl, etc.

Additional information

Weight 4.8 kg
Basis

SMX Hybrid Polymer

Consistency

Stable Paste

Curing system

Moisture Curing

Skin formation (23°C/50% R.H.)

Ca. 5 min

Curing speed (23°C/50% R.H.)

3 mm/24h

Hardness

65 ± 5 Shore A

Density

1,47 g/ml

Elastic recovery (ISO 7389)

> 75 %

Maximum allowed distortion

± 20 %

Max. tension (ISO 37)

3,20 N/mm²

Elasticity modulus 100% (ISO 37)

2,30 N/mm²

Elongation at break (ISO 37)

400 %

Temperature resistance

-40 °C → 90 °C

Application temperature

5 °C → 35 °C

Technical Data Sheet

Declaration of Performance

Product Information

Weight 4.8 kg
Basis

SMX Hybrid Polymer

Consistency

Stable Paste

Curing system

Moisture Curing

Skin formation (23°C/50% R.H.)

Ca. 5 min

Curing speed (23°C/50% R.H.)

3 mm/24h

Hardness

65 ± 5 Shore A

Density

1,47 g/ml

Elastic recovery (ISO 7389)

> 75 %

Maximum allowed distortion

± 20 %

Max. tension (ISO 37)

3,20 N/mm²

Elasticity modulus 100% (ISO 37)

2,30 N/mm²

Elongation at break (ISO 37)

400 %

Temperature resistance

-40 °C → 90 °C

Application temperature

5 °C → 35 °C

Technical Data Sheet

Declaration of Performance

Related Products