Klober Permo Ultra 120 - 1m x 50m 
ALM Code 5 Milled Lead - 450mm x 6m 
Easy-Trim Ridge F Universal 6m Dry Ridge Kit - Pallet of 84 + FREE DeWalt XR Combi Drill + Impact Twin Pack 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
ALM Code 4 Milled Lead - 914mm x 6m 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Gorilla Contact Adhesive Tube - Clear 75g 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
Code 7 Cast Lead - 1200mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
FloPlast Half Round Running Outlet, Black 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Code 6 Cast Lead - 180mm x 3m 
Code 4 Cast Lead - 914mm x 3m 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Code 8 Cast Lead - 800mm x 3m 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
OX Pro Magnetic Level 600mm 
ALM Code 7 Milled Lead - 1200mm x 3m 
Soudal 140 LQ Contact Adhesive – 5 Litre 
Uses
The Trade Expanding Gunfoam by Soudal is the ultimate self expanding polyurethane foam for tradespeople or DIYers. It is perfect for all general purpose gap filling and the insulation of holes and voids in most common construction applications. With its fantastic acoustic and thermal properties, its value as an expanding foam outweighs competitors. It can be used internally and externally but is typically applied during the installation of windows, filling in voids and sealing openings in roof constructions.
Preparation
Due to the nature of the expanding foam, it doesn't require too much preparation. However, good practice would be to take a stiff brush and sweep the surfaces, removing any small debris present. Any organic growth should be eradicated using a fungicide, and any oil, grease, dirt, dust, etc, should be removed.
Application
- Shake the can thoroughly for at least 20 seconds.
- Fit the gun on the adaptor of your chosen PU Gun applicator.
- Slightly moisten the surface with a water sprayer to enhance the curing speeds.
- Hold the can upside down and fill 65% of the void, allowing the expanding foam to fill the rest.
- If you require another layer, allow the first to dry, slightly moisten the surface and apply a second load of expanding foam.
Limitations and Notes
- Any cured expanding foam will have to be mechanically removed.
- Any uncured expanding foam can be cleaned away using a damp cloth.
- Moisten the surface to enhance the curing speed.
