Soudal Aquafix All Weather Sealant – Clear 300ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Soudal Adhesive Remover - 400ml 
Klober Dry Ridge System, 6m (KR5200) 
FloPlast Square Line Gutter Angle 135° Black 
ALM Code 8 Milled Lead - 390mm x 6m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Code 6 Cast Lead - 914mm x 3m 
ALM Code 4 Milled Lead - 600mm x 3m 
ALM Code 7 Milled Lead - 300mm x 3m 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Bond It AS900 Acoustic Sealant - White 900ml 
FloPlast Half Round Downpipe Socket, Black 
Code 7 Cast Lead - 760mm x 6m 
Ulti-Mate 10K Slate Vent Adaptor 
Everbuild 404 Fungicidal Wash – 5 Litre 
Klober Double Pantile Vent - Slate Grey KG9858-3-0429 (Box of 10) 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
IKO Shed Felt - Green 10m Roll 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Ulti-Mate Sandtoft Rivius Charcoal Roof Vent Tile 
Code 8 Cast Lead - 914mm x 3m 
Siroflex Trade High Viscosity Superglue - 50g 
Uses
The Genius Gun Trade Pipe and Plumbing Foam by Soudal is a fantastic product with excellent stability, filling capacity and adhesion, ensuring that a robust, long-lasting gap-filler is extruded. It's equipped with a patented Genius Gun attachment, allowing direct application from the aerosol with reusability up to 6 weeks from the initial application. It's perfect for pipes, electrical wiring, general cavities and static and non-static joints.
Preparation
Before commencing the application, ensure that all contaminants present are removed, including dirt, dust, grease, oil, organic growth, loose debris, and flaking material. Before applying the expanding foam into the void, slightly moisten the surface to enhance bonding and curing.
Application
- Shake the can thoroughly for at least 20 seconds and repeat it regularly throughout the application.
- Open the cover and pull the folded tube to sit perpendicular to the aerosol can.
- Fill the cavity up to 1/3, and then allow the expanding foam to fill the rest.
- If you have to work in layers, allow the first to cure fully. Afterwards, use the same method as before, slightly moistening the surface.
- Apply the second load directly into the void and over the first layer, filling 1/3 of the cavity and allowing the expanding foam to fill the rest.
Limitation and Notes
- Ensure that the void you intend to fill has been slightly moistened to enhance curing and adhesion.
- Any cured expanding foam can only be removed mechanically.
- Any uncured expanding foam can be wiped away using a damp cloth.
