Bond It Dec-Mate Flexible Filler - White EU3 
Everbuild Instant Nails – White 290ml (Box of 12) 
ALM Code 5 Milled Lead - 1000mm x 3m 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
Permavent Plain Easy - Box of 20 
Everbuild Forever Clear Silicone Sealant – 295ml 
ALM Code 8 Milled Lead - 600mm x 6m 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Hambleside Danelaw (HD TVSPA) Tile Vent Adaptor and Flexi for TV15 Range 
Code 4 Cast Lead - 510mm x 6m 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
ALM Code 4 Milled Lead - 240mm x 3m 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
Timco Mixed Cable Clips 
Ronseal Kitchen & Bathroom Repair Kit 
Everbuild Seal Rite Strip Out Tool 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Ulti-Mate 10K Slate Vent Adaptor 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
Uses
The Genius Gun Plasterboard Adhesive by Soudal is forged to provide effective adhesive. It is stored in a small and economical 600ml aerosol can with a unique Genius Gun attachment, which allows the user to apply the adhesive directly from the can. The patented Genius Gun head by Soudal enables multiple uses, with it viable for up to 6 weeks after its first use. This adhesive is suitable for horizontal and vertical use, with its superior bonding strength holding insulation boards effortlessly.
Preparation
Before commencing the application, you should prepare the surface to ensure the optimal adhesive is achieved. Start by removing any dirt, dust, grease, oil, talcum, organic growth, etc. If any bubbles, cement slurries and sinter layers are present, you must remove them before starting the application.
Application
- Equip protective goggles and gloves and shake the can thoroughly for at least 20 seconds.
- Open the cover, folding the tube perpendicular to the aerosol can
- As you proceed with completing the application, regularly shake the can, ensuring its composite is constantly mixed
- Apply the adhesive to one of the panels you intend to bond
- Bring the surfaces together and apply pressure, allowing the adhesive to cure and bond the surfaces
Limitations and Notes
- After using the product, you must ensure that the valve is cleared of all foam and cleaned to make it reusable.
