Code 8 Cast Lead - 850mm x 6m 
Everbuild Flexible Decorators Filler – White 290ml 
Code 4 Cast Lead - 150mm x 3m 
OX Trade Plastic Speed Rafters Square Set 
Bond It Silicone Ultra Waterseal - Clear 5L 
Soudal Sealant Remover – 400ml 
Soudal Genius Gun Gap Filling Foam - 750ml 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Bond It The Beast PU Adhesive - Brown 150ml 
FloPlast Square Line Gutter Angle 135° White 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Everflex Contract 125 One Hour Caulk, Brown - 300ml (Box of 25) 
Code 6 Cast Lead - 300mm x 6m 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
OB1 Grip & Grab Waterproof Adhesive 
ALM Code 8 Milled Lead - 360mm x 6m 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Lead Flexi Slate Pipe Flashing - Flat 
Permavent Easy Slate 500 - Box of 100 
ALM Code 4 Milled Lead - 600mm x 3m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
