Cast Lead Dome Set (Lead Dots) - Pack of 20 
ALM Code 5 Milled Lead - 600mm x 6m 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Circular Soffit Vent, Brown 
Code 4 Cast Lead - 760mm x 3m 
Code 3 Cast Lead - 450mm x 3m 
FloPlast Round 92½° Bend - White 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
ALM Code 8 Milled Lead - 300mm x 3m 
Timco 25 Spanner Set 
Thompson's Stain Block Damp Seal - White 250ml 
Everbuild No Waste Foam – 750ml 
Cromar Bitumen Trowel Mastic - Black 5L 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
ALM Code 3 Milled Lead - 450mm x 6m 
Everbuild Quick Drying Clear Varnish - Matt 2.5L 
Timloc Castellated Tile Vent Red (Box of 8) 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Permavent Black Breather Membrane – 1m x 20m 
OB41 High Performance Carburettor Cleaner - 400ml 
Everbuild Instant Nails – White 290ml 
Soudal Mitre Kit 50g + 200ml - Clear 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
