Code 6 Cast Lead - 600mm x 6m 
Ronseal Wet Rot Wood Hardener - 250ml 
Klober Dry Ridge System, 6m (KR5200) 
Evo-Stik Seriously Strong Stuff Fast Setting Adhesive, White - 290ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
Freeflow 112mm Round Union Gutter Bracket - White 
Bond It PVA & Adhesive Sealer - White 5L 
ALM Code 8 Milled Lead - 1000mm x 3m 
ALM Code 7 Milled Lead - 180mm x 3m 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
ALM Code 5 Milled Lead - 240mm x 6m 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
ALM Code 3 Milled Lead - 1200mm x 3m 
Soudal Repair Express Cement – Beige 290ml (Box of 12) 
Soudal Butyrub Non-Setting Mastic - Black 300ml (Box of 12) 
Soudal Swipex Wipes - 100 Wipes 
Timco Screwdriver 4-Tool Set 
Everbuild Stick2 Superglue De-Bonder - 20ml 
Uses
The Trade Expanding Foam by Soudal is the ultimate general-purpose expanding foam for tradespeople or DIYers. It offers outstanding filling capacity, with the most common surface suitable for adhering. With its fantastic acoustic and thermal properties, its value as an expanding foam outweighs competitors. It can be used internally and externally but is typically applied during the installation of windows, filling in voids and sealing openings in roof constructions.
Preparation
Due to the nature of the expanding foam, it doesn't require too much preparation. However, good practice would be to take a stiff brush and sweep the surfaces, removing any small debris present. Any organic growth should be eradicated using a fungicide, and any oil, grease, dirt, dust, etc, should be removed.
Application
- Shake the can thoroughly for at least 20 seconds.
- Securely fit the nozzle to the can and hold it upside down to apply
- Slightly moisten the surface with a water sprayer to enhance the curing speeds.
- Hold the can upside down and fill 1/3 of the void, allowing the expanding foam to fill the rest.
- If you require another layer, allow the first to dry, slightly moisten the surface and apply a second load of expanding foam.
Limitations and Notes
- Any cured expanding foam will have to be mechanically removed.
- Any uncured expanding foam can be cleaned away using a damp cloth.
- Moisten the surface to enhance the curing speed.
