ALM Code 5 Milled Lead - 914mm x 6m 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
ALM Code 3 Milled Lead - 390mm x 6m 
Everbuild Glass Protector - Red (600mm x 25m) 
Easy-Trim Over Fascia Vent - 10mm x 1m 
Bond It Cove-Mate Coving Adhesive - White EU3 
IKO Super Shed Felt - Black 8m Roll 
Bond It Contractors PVA - 25L White 
Everbuild 501 PVA - 2.5 Litre 
Gorilla Tape - Black (48mm x 32m) 
FloPlast Square Union Unit - White 
ALM Code 4 Milled Lead - 1000mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Uses
Pro 20D Superfast Wood Glue delivers excellent adhesive properties when bonding various surfaces, and this product works well with all common woods, including paper, board, chipboard, softwood and veneer. This product also works well in the construction bond of mortise and tenon joints, punches, etc.
Preparation
To prepare the surface correctly for this product, ensure the application area is smooth but only partially non-porous. Smooth surfaces need to be slightly ground to improve the adhesion. Besides that, you'll need to ensure the surfaces are free from contaminants like dust, oil, grease, etc., which can hinder the adhesion.
Application
- Apply the adhesive to one of the two surfaces, using a fine-tooth brush or comb to spread the bond.
- Connect the surfaces and firmly hold them together for 30 minutes.
Limitations
- Discolouration can occur on certain types of oak and tropical wood.
- Do not dilute the adhesive.
