Code 8 Cast Lead - 850mm x 6m 
ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Bond It Power Frost Premium Quality Concentrate Additive - 1L Pale Blue 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
Code 3 Cast Lead - 180mm x 6m 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Irwin Jack Plus 880 Universal Handsaw - 20" (Pack of 10) 
Everbuild Aquaseal Liquid Roof – Slate Grey 21kg 
Bond It Duct Tape - Silver 48mm x 45M 
20 x Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Soudal 5 Minute D4 Wood Adhesive Gel - 290ml (Box of 12) 
ALM Code 8 Milled Lead - 1600mm x 6m 
Cromar Black Bitumen Paint - 5 Litre 
ALM Code 3 Milled Lead - 914mm x 6m 
Everbuild 501 PVA - 1 Litre 
Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
ALM Code 7 Milled Lead - 360mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml (Box of 25) 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml 
Soudal Repair Express Plaster - White 290ml 
Code 6 Cast Lead - 390mm x 6m 
ALM Code 4 Milled Lead - 800mm x 3m 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Uses
The Repair Express Cement by Soudal is perfect for repairing mineral surfaces that are suffering from cracks, holes and general small damage. This product is forged using a unique, granular structure which has fantastic adhesion to various surfaces, allowing it to fill and bridge gaps effortlessly. Compared to other conventional cement repair products, this one stands out with its ability to be painted, blending it seamlessly into the structure.
Preparation
Before commencing the application, ensure that the surface and gap to be filled are entirely free from contaminants that can hinder the adhesion, such as dirt, dust, grease, oil, organic growth, etc. Highly porous surfaces should be primed to enhance the glue, ensuring an effective and optimal result.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place the cartridge into a suitable sealant applicator tool.
- Point the nozzle to the gap to be filled and fill it up to 5 cm; if the gap is more significant than this, allow the first layer to cure and apply a second.
- After the first layer has cured, apply a second load into the area and fill it, using a tool to smooth it down to a flush finish.
Limitations and Notes
- Do not apply this product to areas that are subject to constant water immersion
- This product is not suitable for expansion and dilatation joints
