Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Armatool Longo Chalk Reel 30m & Fluorescent Chalk Orange 
Bond It Mould Stop - Clear 1L 
Siroflex PVCu Trim & Mitre Cutter 
Code 3 Cast Lead - 600mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Ronseal 3 in 1 Basecoat - White 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixing - 10 Pieces 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
OX Pro Electricians Chisel - 2¼" X 10" 
Timloc Underlay Felt Lap Vent 
Soudal Silirub 2, White - 300ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Everbuild Mitre Fast Activator – 200ml 
FloPlast Universal Hopper, White – 65-68mm 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Armatool 30m Longo Chalk Line 
Bond It PVA & Adhesive Sealer - White 1L 
Samac Copper Wire Coil 36m x 2mm 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Uses
The Repair Express Cement by Soudal is perfect for repairing mineral surfaces that are suffering from cracks, holes and general small damage. This product is forged using a unique, granular structure which has fantastic adhesion to various surfaces, allowing it to fill and bridge gaps effortlessly. Compared to other conventional cement repair products, this one stands out with its ability to be painted, blending it seamlessly into the structure.
Preparation
Before commencing the application, ensure that the surface and gap to be filled are entirely free from contaminants that can hinder the adhesion, such as dirt, dust, grease, oil, organic growth, etc. Highly porous surfaces should be primed to enhance the glue, ensuring an effective and optimal result.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place the cartridge into a suitable sealant applicator tool.
- Point the nozzle to the gap to be filled and fill it up to 5 cm; if the gap is more significant than this, allow the first layer to cure and apply a second.
- After the first layer has cured, apply a second load into the area and fill it, using a tool to smooth it down to a flush finish.
Limitations and Notes
- Do not apply this product to areas that are subject to constant water immersion
- This product is not suitable for expansion and dilatation joints
