Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
Sika Mould Buster – 5 Litre 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
ALM Code 8 Milled Lead - 760mm x 6m 
ALM Code 3 Milled Lead - 1600mm x 6m 
Timco Cloth Tape White - 50m x 48mm 
Code 5 Cast Lead - 1200mm x 3m 
Soudal B2 Fire & Acoustic Expanding Foam – 750ml (Box of 12) 
Samac Half Round Snowguard Bracket - 150mm (6") 
Bond It Bitumen Primer - Black 2.5L 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Cromar All Weather Roof Coat - Black 5 Litre 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Bond It Felt Adhesive - Black 2.5L 
Code 7 Cast Lead - 600mm x 3m 
OX Pro Rodless Sealant Gun - Up to 400ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Timco Hazard Tape 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
ALM Code 4 Milled Lead - 1200mm x 3m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
