Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
Code 8 Cast Lead - 390mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
FloPlast Half Round Union Unit - White 
Timco Lithium EP2 Grease - 400g 
ALM Code 5 Milled Lead - 1200mm x 3m 
ALM Code 7 Milled Lead - 240mm x 6m 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Everbuild Stixall Extreme Power – Clear 290ml 
Ronseal 3 in 1 Basecoat - White 2.5L 
ALM Code 4 Milled Lead - 210mm x 6m 
Code 7 Cast Lead - 1600mm x 3m 
Siroflex Painters Caulk-It - 380ml 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Black (Box of 5) 
Cromar Vent 3 High Performance Breathable Membrane - 1m x 50m (Full Pallet of 54) 
Soudal Lead Sheet Sealant 290ml - Grey 
500 x Felt Support Trays 1.5m (Half Pallet) 
OX Pro Mini Round Point Shovel 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Soudal Genius Gun Gap Filling Foam - 750ml 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Uses
The Water Stop by Soudal is a fantastic repair solution for damaged roofs. It uses a solvent-based acrylate copolymer with synthetic fibres to securely bridge small cracks and damages. It's applied through a straightforward brush or, if it's raining, a spatula. Areas in which this product excels at repairing include roofs, gutters, cupolas, and general sealing of cracks and blisters. You may also use this to overlap large damages.
Preparation
Before commencing the application, ensure the surface is free from contaminants that can hinder the adhesion and performance of the product. Some of the impurities you need to eliminate include dirt, dust, grease, oil, loose debris, flaking material and organic growth. The best way to achieve this is by using a stiff brush, fungicide and a grease and oil remover. Very porous surface should be primed using the Water Stop diluted with 10-15% white spirit.
Application
- Any large damages to the surface should be filled using a Soudafalt or similar product.
- Use a brush or spatula (if applying underwater) and apply directly to the surface.
- If you need to apply more than one coat, allow eight days for the first to dry before applying the second.
