Soudal Fix ALL High Tack – Grey 290ml (Box of 12) 
Permavent Easy Slate 500 - Box of 100 
Code 4 Cast Lead - 180mm x 6m 
Bond It PVA & Adhesive Sealer - White 5L 
Gorilla Contact Adhesive Tube - Clear 75g 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Everbuild Wet Rot Wood Hardener – 250ml 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
Armatool Leather Pouch & Leather Belt 
ALM Code 3 Milled Lead - 360mm x 6m 
Code 6 Cast Lead - 1000mm x 6m 
When you’re installing your Stronghold Fibreglass roofing, you need Stronghold Fibreglass Catalyst. This catalyst allows both the base resin layer at the bottom of the installation and the topcoat layer at the top of the installation to be cured properly.
Fibreglass roofs are made of three layers. A layer of fibreglass resin is spread over the roof first to create a smooth surface. Then a layer of GRP matting is installed that forms the solid core of the fibreglass. Finally, a layer of topcoat is spread out to secure the matting and protect it. The Stronghold Fibreglass Catalyst is vital to making sure that both the first and third layers can cure properly.
When mixing catalyst batches, make sure to follow all installation instructions and safety precautions. Fibreglass may not be suitable for inexperienced DIYers.
