Klober Plain Roof Tile Vent Adaptor - KG990500 
ALM Code 5 Milled Lead - 300mm x 3m 
Code 5 Cast Lead - 850mm x 6m 
Timco Professional Wire Strippers 
Klober Universal Tile Vent Terracotta KG9854 (Box of 10) 
Ronseal Precision Finish Brush - 0.5 Inch 
Bond It PVA & Adhesive Sealer - White 1L 
FloPlast Half Round Square Line Gutter Adaptor - White 
ALM Code 3 Milled Lead - 1600mm x 6m 
Everbuild 402 Waterseal – 25 Litre 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Code 6 Cast Lead - 600mm x 6m 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Thompson's Water Seal - 5L 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Klober Universal Tile Vent Brown KG9854 (Box of 10) 
ALM Code 4 Milled Lead - 1200mm x 3m 
Everbuild Everflex 115 G.P Building Mastic - Brown 285ml (Box of 25) 
FloPlast Half Round Downpipe Shoe, Black – 68mm 
Gorilla Glue - Dark Brown 60ml 
ALM Code 6 Milled Lead Flashing - 600mm x 3m 
Soudal PVCu Solvent Frame Cleaner - 1L 
Bond It Felt Adhesive - Black 5L 
Everbuild Stixall Extreme Power – White 290ml 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
Ronseal Quick Drying Stain Block - Aerosol White 
Uses
The Quick Drying Drive Seal from Thompson's offers excellent rejuvenation to your tarmac, restoring it to its former glory! Thompson's crafted this product with a thick, black, low-sheen finish, composite of acrylic polymers, inorganic pigments and fillers in aqueous solutions. It is what allows this product to be so effective, offering outstanding resistance to unsightly oil & fuel stains.
Preparation
Prepare the tarmac by giving it a thorough scrub with a stiff, bristly brush, and this is to remove any dirt or organic growth. You can always apply a dedicated cleaner to the tarmac before eradicating any unwanted contamination. Fill holes with fresh tarmac or a cold cure tarmac if needed. Afterwards, rinse off all cleaning products and ensure the surface is dry before commencing the application.
Application
Please note that the drying times will vary depending on the environmental conditions.
- Give the tin a thorough stir before using it.
- Use a long pile roller and tray for the application.
- Pour the paint into the roller tray and fully load it onto the roller itself.
- Apply directly onto the surface, noting where you've applied it to avoid re-coating the same area before thoroughly drying.
- Ensure you keep stirring the paint to ensure it's consistently mixed.
- Wait 4 hours before applying a second coat.
Limitations
- Do not apply this product if it's raining or forecasted to rain.
- Oil and petrol spills should be removed as soon as possible with warm water.
- Allow new tarmac 90 days to fully dry before applying this product.
- Protect from frost.
