Uses
One Coat Concrete Seal by Thompson's delivers excellent protection for concrete, and using its formulated acrylic resins in aromatic hydrocarbon, it provides a layer that seals the surface. This product repels various contaminants, including water, oil, grease and fuel spills.
Preparation
Scrub the surface with a stiff bristle brush, removing any dirt, dust or similar contaminants. Ensure that the area is well-ventilated and that you clean the surface before using a dedicated cleaner, but make sure that the surface is dry before commencing the application.
Application
Please note: the temperature and environmental conditions can affect this product's drying times.
- Give the tin a thorough stir.
- Pour the tin into a roller tray and apply a long pile roller directly to the surface in long, smooth strokes. (If applying to the garage floor, start from the furthest point from the door, working towards it.)
- Ensure when applying, any puddles are dispersed evenly, making the overall coat even.
- Certain surfaces, such as porous ones, may require a second coat 4 hours later.
Limitations
- Do not apply this product in the rain or if it is imminent during drying.
- New concrete must be allowed up to 30 days to cure fully.
- This product dries to a satin sheen finish; however, the sheen level depends on the substrate.
- The appearance of the surface may change with this product. So, test it on a small, inconspicuous surface before completing the entire application.
- Prevent any spillages from reaching vegetation or garden furniture.
- Avoid contact with plastics and rubber materials (including footwear) whilst wet.
- Remove any splashes whilst still wet with white spirit.
