Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Thompson's Water Seal - 2.5L 
Armatool Mop Heads Size 12 
Code 4 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 390mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Ronseal Expanding Foam Filler - 500ml 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It Trowel Mastic - Black 5L 
Timco 30mm Cladding Pin - 250 Pieces 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
FloPlast Square External Stopend - White 
Code 6 Cast Lead - 150mm x 3m 
Thompson's One Coat Damp Seal - White 750ml 
Uses
The Water Seal by Thompson offers excellent surface protection due to its unique advanced formula. Thompson brewed this formula with a combination of alkyl polysiloxane resin and hydrophobic waxes, offering outstanding water protection. This product is designed to go on surfaces such as;
- Brick
- Mortar
- Concrete
- Stone
Preparation
Before application, give the surface a thorough scrub with a stiff bristle brush, and if any cracks are present, fill them in and do any pointing repairs required.
Application
- Give the tin a good shake
- Using a brush or roller, apply to the wall working at 1-metre sections, applying from the bottom upwards
- Once you've completed the first section, move on to the next, working from the bottom upwards
- Ensure you coat mortar lines and cover the whole wall, including isolated areas.
- Once the first coat has dried (average 2 hours, depending on the surface), apply the second coat.
Limitations
- Do not apply this product if the air or surface temperature is below 10°C
- If rain it is raining or imminent during the application and drying time, do not apply this product.
- This product is unsuitable for masonry paint or other pre-painted surfaces.
- Some substrates may darken when treated.
- Detergent should not be used to clean the surface which is being protected.
- This product is unsuitable for application on surfaces such as asphalt, synthetic fibres, plastics or natural rubber.
- This product is not suitable for application on wood.
- During application, ensure the environment is well-ventilated.
- This product is for external use only. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
