Right Hand Klober Contract Dry Verge Unit Brown 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Code 6 Cast Lead - 600mm x 3m 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Code 7 Cast Lead - 360mm x 3m 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750 ml 
Code 8 Cast Lead - 800mm x 6m 
OX TOOLTREK Modular Storage System - 3 Piece 
Code 4 Cast Lead - 760mm x 6m 
Code 3 Cast Lead - 450mm x 3m 
ALM Code 7 Milled Lead - 1200mm x 6m 
Everbuild KOS Black Fire Cement - 1kg 
Timloc 5" Aero Core with Cowl & Baffle Terracotta 
The Eaves Vent Roll Out Rafter Tray by Timloc is an outstanding product that enables ventilation to your roofing system, combating condensation and aiding the structural integrity of the building. It has been quality tested against various regulations and standards, and it has passed the following;
- All NHBC Requirements
- BS EN ISO 9001
- BS EN ISO 14001
- All Building Standards
- All relevant Building Regulations
Installation
Unroll the ventilator along the rafters, and this should be along the entire length of the eaves on both sides of the building, creating a cross-flow ventilation action.
Position centrally above the wall plates because it's the narrowest part of the roof and is most likely to constrict the airflow of the roof insulation.
Push the corrugations down over the top of the rafters and secure them using clout nails or staples.
