Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Code 8 Cast Lead - 240mm x 3m 
Armatool Stripping Spade 
Soudafoam Window & Door Hand Held - 750ml 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) Trowel Mastic
Best Sellers
-
2 Part High Performance Wood Filler – 1.4kg
From: £17.98 Incl VAT £14.98 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild 5 Minute Polyurethane Wood Adhesive Gel – 310ml (Box of 12)
£81.60 Incl VAT £68.00 Excl VAT Add to basket -
Samac Copper Wire Coil 36m x 2mm
£23.49 Incl VAT £19.58 Excl VAT Add to basket -
Ronseal Stays White 2in1 Paint & Primer – Matt 750ml
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Everbuild Clear Fix – 290ml (Box of 12)
£79.92 Incl VAT £66.60 Excl VAT Add to basket -
ALM Code 4 Milled Lead – 1200mm x 6m
£416.30 Incl VAT £346.92 Excl VAT Add to basket
Frequently Asked Questions (3)
Bitumen trowel mastic is a black, heavily filled bituminous compound reinforced with fibres. In spite of the product's surface membrane, it remains soft below to allow moderate movement.
Trowel mastic is made for perimeter pointing around wood and metal window and door frames which aid in waterproofing your home.
To apply it, use a trowel or a troweling knife. The surface should be pointed to a smooth finish immediately after application.
Trowel Mastic
Trowel mastic is made for perimeter pointing around wood and metal window and door frames. Trowel mastic comes in various sizes including 3kg, 6kg, 1l, 2.5l and 5 litre — depending on the product and the brand.
What is Bitumen Trowel Mastic?
Bitumen trowel mastic is a black, heavily filled bituminous compound reinforced with fibres. In spite of the product’s surface membrane, it remains soft below to allow moderate movement. Can be used as a sealant or a filler for mastic asphalt, roofing felt, corrugated iron, metal gutters, and downpipes.
Applying Trowel Mastic
Before using Trowel Mastic, make sure that all surfaces are be clean, dry, and free from dirt, dust, grease, and other contamination. To apply it, use a trowel or a troweling knife. The surface should be pointed to a smooth finish immediately after application. Surface drying occurs within 7 days, followed by gradual drying of the cross-section. After use, flatten the surface of the mastic and replace the polythene disc, ensuring the container is properly sealed.
After using the trowel, make sure that you clean tools and equipment immediately after use with white spirit. Hardened material can only be removed by mechanical means. Do not use solvents to remove from hands/skin – use soap and water with the aid of Wonder Wipes.
