OX Pro Tuff Spirit Level - 600mm 
20 x Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Bond It Power Mix Concentrated Liquid Mortar Plasticiser - 1L Brown 
Freeflow Square Gutter System Internal Stopend - White 
Ronseal Expanding Foam Filler - 500ml 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
OX Pro Brick Hammer - 24 oz 
SOUDAL Fix ALL X-treme Power & Tack Sealant Adhesive Express WHITE - 280ml 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Soudal Decorators Caulk White – 290ml 
Code 6 Cast Lead - 1200mm x 3m 
OX Tools Pro Combination Square 300mm / 12in 
ALM Code 5 Milled Lead - 1000mm x 3m 
OX Pro Rodless Sealant Gun - Up to 400ml 
ALM Code 8 Milled Lead - 300mm x 3m 
Code 8 Cast Lead - 914mm x 3m 
201 Mortar Admix – 5 Litre 
Bond It Multi-Purpose Powder Filler - White 450g 
Lead Flexi Slate Pipe Flashing - Flat 
Code 7 Cast Lead - 1200mm x 6m 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Bond It Mould Stop - Clear 2.5L Dry Fix Accessories
Best Sellers
-
Bond It Contractors Grade PVA – White 500ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Hambleside Danelaw (HD RSPA) Adaptor and Flexi for TV10 Range
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
12 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m
£576.00 Incl VAT £480.00 Excl VAT Add to basket -
Timloc Mini Castellated Tile Vent Red (Box of 14)
£279.86 Incl VAT £233.22 Excl VAT Read more -
Circular Soffit Vent, Brown
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Cromar Roof Felt Adhesive – Black 2.5 Litre
£18.49 Incl VAT £15.41 Excl VAT Add to basket
Dry Fix Accessories
While it is common to sometimes mortar in the ends of the roof verge even in a structure that is otherwise dry fix, for roofers looking for a totally dry tiling arrangement the Easy Trim End Cap and Starter Unit are vital. These are both made of a polypropylene polymer that is highly resistant to heat, weather, and UV rays. In addition, both are totally watertight, protecting the vulnerable underbelly of the verge tiles from the weather and also any wayward wildlife.
Why should I use an End Cap and Starter Unit?
The End Cap and Starter Unit are important because they serve to seal off each end of a set of verge tiles without any need for mortaring. The less a roof relies on mortaring, the more resistant to the weather it is and the more it can flex to absorb damage.
The Starter Unit is mounted where the verge meets the eaves of the roof. The End Cap on the other hand is mounted where the verge meets the ridge at the top of the roof. Both are critical to implementing a full dry fix roof.
