ALM Code 8 Milled Lead - 510mm x 3m 
Cromar Black Bitumen Paint – 2.5 Litre 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Code 5 Cast Lead - 1600mm x 3m 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
Timco Chalk Line Set 
Code 7 Cast Lead - 300mm x 3m 
Standard Brush 4-Inch 
Freeflow 65mm Square Down Pipe Connector - Black 
Everbuild Mammoth Clear Weatherproof Tape 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Code 4 Cast Lead - 450mm x 3m 
Everbuild Caulk Once – White 295ml (Box of 12) 
Everbuild Salt-Away Salt Remover – 5 Litre 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Soudaseal Mirror Light Grey, 290ml 
FloPlast Side Fix Rafter Bracket 
Code 6 Cast Lead - 1600mm x 6m 
Sika Mould Buster – 5 Litre 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
ALM Code 3 Milled Lead - 600mm x 3m 
Timco Cloth Tape White - 50m x 48mm Roof Felt Adhesives
Best Sellers
-
Bond It PVA & Adhesive Sealer White 1L – Box of 12
£43.98 Incl VAT £36.65 Excl VAT Add to basket -
Permavent Easy Slate 600 – Box of 100
£124.99 Incl VAT £104.16 Excl VAT Add to basket -
OX Trade Wrecking Bar
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Gap Filler Expanding Foam Gun Grade – 750ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Axgard 6mm Solid Polycarbonate Sheet, Patterned
From: £30.50 Incl VAT £25.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Tecnic Joint Backer Rod – 10mm x 10m
£11.49 Incl VAT £9.58 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
