Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Soudal Firecement HT, Black - 300ml (Box of 12) 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Code 7 Cast Lead - 850mm x 6m 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Code 8 Cast Lead - 180mm x 3m 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Siroflex Trade Strength Glue Screws SF Adhesive 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
OX Pro Mortar Spike, 300mm 
Bond It 30 Minute PU Wood Adhesive - Brown 750g 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Siroflex Trade High Viscosity Superglue - 50g 
Bond It Decking Cleaner - Clear 5L 
Timco Round Wire Nails, Pack of 40 
SOUDAL Fix ALL X-treme Power & Tack Sealant Adhesive Express WHITE - 280ml 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Thompson's Water Seal - 5L 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Klober Profile-Line Flat Tile Vent - Terracotta KG9856-3-0152 (Box of 10) 
Code 3 Cast Lead - 1600mm x 6m 
Ulti-Mate Cambrian Grey Tile Vent 
Cromar Roofing Felt Adhesive - Black 5 Litre Roof Felt Adhesives
Best Sellers
-
ALM Code 5 Milled Lead – 300mm x 3m
£65.14 Incl VAT £54.28 Excl VAT Add to basket -
OX Pro Brick Trowel Philadelphia Pattern – 10″/250mm
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Evo-Stik Impact Adhesive – 500ml
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
Klober Uni-line Vent Slate Grey
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Bond It Felt Adhesive – Black 25L
£72.00 Incl VAT £60.00 Excl VAT Add to basket -
Timloc Interlocking Plain Tile Vent Red (Box of 12)
£239.80 Incl VAT £199.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
