FloPlast Round Line Downpipe Clip, White 
ALM Code 5 Milled Lead - 300mm x 3m 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
Timco Precision Screwdriver Set 6pcs 
ALM Code 4 Milled Lead - 1000mm x 3m 
Ronseal Precision Finish Brush - 2.5 Inch 
Bond It Patination Oil 500ml 
Restec GRPROOF 1010 Top Coat Resin - 20kg 
ALM Code 3 Milled Lead - 180mm x 3m 
FloPlast Square Line Shoe Black – 65mm 
Everbuild Tarmac Restorer - 5 Litre 
Timco Blue Polypropylene Rope 8mm x 15m 
Everbuild 501 PVA - 1 Litre 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
Eco-Shovel & Hard Brush Black Large Pan 
FloPlast Square Line Offset Bend 112.5° Black – 65mm 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Ronseal Expanding Foam Filler - 300ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
ALM Code 8 Milled Lead - 240mm x 3m 
Bond It Decking Cleaner - Clear 5L 
Code 3 Cast Lead - 800mm x 6m 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
Thompson's One Coat Waterseal - 2.5L 
OX Pro Magnetic Level 600mm 
Code 8 Cast Lead - 1600mm x 6m 
Bond It Decking Oil - Natural 5L 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Timco Lithium EP2 Grease - 400g 
Bond It Trowel Mastic - Black 1L 
Thompson's One Coat Waterseal - 5L 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Ronseal Diamond Hard Floor Varnish - Clear Matt 5L 
Everbuild Caulk Once – White 295ml (Box of 12) 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
OX Pro Moulding Bar - 10" / 250mm 
Soudal Pro 40P PU Wood Adhesive - 750g 
Thompson's Water Seal - 1L 
Everbuild Pinkgrip SF But It’s White – 380ml 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Code 4 Cast Lead - 600mm x 6m Flashing Tape
Best Sellers
-
ALM Code 7 Milled Lead – 1000mm x 3m
£303.02 Incl VAT £252.52 Excl VAT Add to basket -
Everbuild Wood Stain – 750ml (Various Colours)
From: £14.99 Incl VAT £12.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Weather Mate Gap Filler & Adhesive – 295ml (Various Colours)
From: £8.99 Incl VAT £7.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timloc Underlay Felt Lap Vent
£3.50 Incl VAT £2.92 Excl VAT Add to basket -
OX Pro Series Adjustable Wrench Extra Wide Jaw
From: £18.62 Incl VAT £15.52 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal PTFE Spray – 400ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
