Code 8 Cast Lead - 210mm x 6m 
Easy-Trim End Cap Angled - Black (Box of 10) 
Code 3 Cast Lead - 1200mm x 3m 
Code 5 Cast Lead - 240mm x 6m 
Klober Profile-Line Limarech Tile Vent - Slate Grey KG9859-3-0429 (Box of 10) Flashing Tape
Best Sellers
-
FloPlast Universal Hopper, Brown – 65-68mm
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Spax T-Star Plus Washer-Head Wirox Coated Screws – 8.0mm Diameter (Box of 16)
From: £12.99 Incl VAT £10.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ariel 125gsm Weight Untaped Harcon VPU
£44.99 Incl VAT £37.49 Excl VAT Read more -
Cromapol Acrylic Roof Coating – 20kg
From: £105.99 Incl VAT £88.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 7 Milled Lead – 240mm x 3m
£73.63 Incl VAT £61.36 Excl VAT Add to basket -
Timco 6pcs Stubby Screwdriver Assorted Set
£11.40 Incl VAT £9.50 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
