Bond It Felt Adhesive - Black 25L 
Code 7 Cast Lead - 850mm x 6m 
Code 8 Cast Lead - 300mm x 6m 
Colron Liquid Scratch Cover - Light 14ml 
Bond It All Weather Roofing Compound - Black 25L 
Timloc Double Roman Tile Vent Brown (Box of 6) 
FloPlast Half Round Internal Stop End, Brown – 112mm 
ALM Code 7 Milled Lead - 450mm x 3m 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Timco Lithium EP2 Grease - 400g 
Soudal Soudabond 265 Classic Spray - 500ml 
FloPlast Square Fascia Bracket Black – 114mm 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Installation Advice
Wall weeps should be used wherever water could collect inside a cavity wall, such as over external lintels, or wherever a cavity tray system is installed. To work effectively wall weeps should be placed directly on top of the base of a cavity tray or DPC, or on the front flange of the lintel. Wall weeps should be spaced at 450mm centres to comply with NHBC recommendations.
Care should be taken to ensure the wall weep is kept clear of mortar and does not become blocked. This is particularly important at the back of the weep which could be blocked by mortar droppings from above.
