FloPlast Square Line Downpipe Clip White 
Klober Uni Angle Ridge End Cap, Black 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Circular Soffit Vent, Black 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
ALM Code 5 Milled Lead - 510mm x 6m 
Code 6 Cast Lead - 800mm x 6m 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
ALM Code 7 Milled Lead - 1600mm x 3m 
Code 7 Cast Lead - 210mm x 6m 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Code 3 Cast Lead - 180mm x 3m 
Code 8 Cast Lead - 1000mm x 3m 
Everbuild PVCu Cream Cleaner - 1 Litre 
Installation Advice
Wall weeps should be used wherever water could collect inside a cavity wall, such as over external lintels, or wherever a cavity tray system is installed. To work effectively wall weeps should be placed directly on top of the base of a cavity tray or DPC, or on the front flange of the lintel. Wall weeps should be spaced at 450mm centres to comply with NHBC recommendations.
Care should be taken to ensure the wall weep is kept clear of mortar and does not become blocked. This is particularly important at the back of the weep which could be blocked by mortar droppings from above.
